What is the reason for the occurrence of string shaft phenomenon in the gear reducer?
24
2024-10
People should be aware of string shaft failures when using gearmotors because it is a very serious problem. But why do gearmotors have string shafts? After reading the following content, you will know what causes it.
People should be aware of string shaft failures when using gearmotors because it is a very serious problem. But why do gearmotors have string shafts? After reading the following content, you will know what causes it. The following is a specific analysis: gear reducer is a driving force transmission mechanism. The key principle is to use the speed converter of the drive gear to reduce the motor's rotation to the required number of revolutions and obtain a larger torque. It is usually categorized into several types, namely, gearmotors, worm gearmotors, planetary gearmotors, and gearmotors made up of them. However, if it is found to have a series of shafts, do you know what causes it? What causes a gear reducer to have a series of shafts problem , it would be that the brakes are not very good, causing the gear reducer to have a series of shafts problem. Second, it would be a broken tooth that causes the typing shaft to lose radial restraint, which in turn causes this. Third, it could be that the driven drive gear on the intermediate shaft is not sealed enough to the middle of the shaft, which means that the alias does not have enough clearance fit, which is normally the key cause. The left and right implies the highlights. If there is any problem that can not be understood, we can always leave a message on the message board of the people's official website, the people will be happy to answer your questions. These are the specific reasons that may lead to the failure of the gear reducer series shaft, and we can generally deal with them according to the above reasons.